Cisco 1812w with wpa2

[rdp1960]

Buongiorno.

Ho un Cisco 1812w con un'interfaccia ISDN che devo smaltire. 
Non voglio buttarlo via. 
Voglio usarlo come access point. 
Ma non ha la crittografia wpa2. 
c'è una versione del firmware per questo? 
Grazie

[Flavio Miranda]

Hi,

 which IOS do you have?  The latest version is 15.1.4M12a.  This version must support.

-If I helped you somehow, please, rate it as useful.-

[rdp1960]

Thanks for the reply.

I'm not an expert but if I understand well on the router is version 12.4 installed. Can the version you suggest be purchased?

Thank you

Here is the output of the show version command

show version
Cisco IOS Software, C181X Software (C181X-ADVIPSERVICESK9-M), Version 12.4(15)T5, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Wed 30-Apr-08 12:09 by prod_rel_team

ROM: System Bootstrap, Version 12.3(8r)YH12, RELEASE SOFTWARE (fc1)

Router uptime is 15 minutes
System returned to ROM by power-on
System image file is "flash:c181x-advipservicesk9-mz.124-15.T5.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 1812W (MPC8500) processor (revision 0x400) with 118784K/12288K bytes of memory.
Processor board ID FCZ122012QA, with hardware revision 0000

10 FastEthernet interfaces
1 ISDN Basic Rate interface
2 802.11 Radios
31808K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2142

r

[Flavio Miranda · Accepted solution]

Yes, 12.4.

 You don't need to buy as long as you have access to Cisco download page and be able to download content(require privilege, usually contract)

 However, this device is end of life,so, you need to upgrade and take all the risk on your own.

-If I helped you somehow, please, rate it as useful.-

[rdp1960 · Accepted solution]

Grazie.