cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3350
Views
0
Helpful
2
Replies

Cisco 1832i firmware ap1g4 (8.1.143.0) lightweight to autonomous upgrade

JunaidM
Level 1
Level 1

Hi,

I am looking for a way how to upgrade subjected firmware from the lightweight to autonomous (ME - Mobility Express),

 

I have Cisco Access Point Air-AP1832i-e-k9, how to download running firmware and upload new one. AP is not allowing me to go into "conf t" mode.

 

Please help.

2 Replies 2

patoberli
VIP Alumni
VIP Alumni

To download software you need to have a valid contract. Then you can download the ME image for this AP and do the lightweight to ME conversion: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-2/b_Mobility_Express_Deployment_guide/b_Mobility_Express_Deployment_guide_chapter_01100.html

Sandeep Choudhary
VIP Alumni
VIP Alumni

As @patoberli mentioned, you need a valid service contract to download software from cisco.

 

Or you can ask your supplier to provide the ME software

 

How to convert : https://semfionetworks.com/blog/convert-a-cisco-capwap-ap-to-a-mobility-express-ap/

 

Regards

Dont forget to rate helpful posts

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: