cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
403
Views
0
Helpful
1
Replies

Cisco 1941W built-in AP goes down?

j_friedrich
Level 1
Level 1

Hi guys,

     Any ideas on how to debug why sometimes the dot11radio0 / 1 go down?  Sometimes, the lights on the router indicating the radio status go out.  Usually, a reload of the ap will bring them back up...

Maybe hardware is starting to fail?  Just unsure on how to debug to find out why it turns off sometimes.

Thanks for everyone's help.

Jason

1 Reply 1

Scott Fella
Hall of Fame
Hall of Fame

Might be that your hardware is failing... I have the same model for my home lab and I don't have that issue:)  Take a look at the logs on the router and see if you see anything that shows the ap failing or shutting down for some reason.  I would open a TAC case though and get it replaced.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: