cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1433
Views
0
Helpful
1
Replies

Cisco 2504 with Radius Server using EAP(PEAP)

umar bhatti
Level 1
Level 1

Hi Guys,

Recently I've deployed wireless at my work place. Everything is working perfectly fine. I got two WLAN'S one for corporate user which gives them domain access using radius server and second one is guests one. Only for internet.

I used PEAP for my corporate WLAN using WPA+WAP2 802.1x. I want to ask you guys to please tell me if its correct and secure how i configured it.

Also under corporate WLAN under AAA Server tab there is a option for Local EAP Authentication. Its not enabled at the moment.

Could you please confirm does this needs to be checked or its ok without this option? I have uploaded screen shots of my corporate wlan.

Please advise if you think it’s not secure enough.

Thanks for your help

Umar

1 Reply 1

Scott Fella
Hall of Fame
Hall of Fame

You do not need to enable that. That is only enabled if your doing EAP off the WLC itself.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: