Cisco 2602 AP sending BPDUs

[spencerondrusek]

Hi,

When I plug in access points they will cause the port to go down on err-disable because of the BPDU Gaurd. 2602s never used to send BPDUs has this changed with the access points or something else in the system.  Is there any need for the guard when the filter exists?

Thanks in advance.

-Spencer

[Leo Laohoo]

This is a known issue, Spencer. 

Disable BPDU Guard on the AP port until the AP can download the IOS from the WLC.  Only then can BPDU Guard can be re-enabled.