cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
134
Views
10
Helpful
1
Replies

Cisco 3504 and 9120, how do i enable TWT(Target Wake Time)?

Hi

How do i enable TWT(Target Wake Time), on my 3504 WLC for use with my 9120 AP's?

Best greetings from Christian Josiassen.

1 Accepted Solution

Accepted Solutions

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

It should be under "Wireless -> {Radioband} ->Network" configuration as shown below. It should be enabled by default (below is with 8.10.x)

AireOS-TWT.png

HTH
Rasika
*** Pls rate all useful responses ***

View solution in original post

1 Reply 1

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

It should be under "Wireless -> {Radioband} ->Network" configuration as shown below. It should be enabled by default (below is with 8.10.x)

AireOS-TWT.png

HTH
Rasika
*** Pls rate all useful responses ***

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: