cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1006
Views
0
Helpful
1
Replies

Cisco 3850 - Direct Connect APs

CB90021204
Level 1
Level 1

Can you non-directly connect APs to a 3850. For example if you had multiple offices within one branch site and your 3850 MC was in the server rack and had 2960s in the other offices. Could you connect your APs to the 2960 switch and have them joined to the 3850 MC?

I've read that APs need to be directly connected to the 3850 however it supports flexconnect?

Would appreciate if anyone could shed some light.

Thanks,

1 Accepted Solution

Accepted Solutions

3850 won't support flexconnect. Also you have to directly connect AP to 3850 (not via transient switches like 2960).

Refer this Q&A to find answer to your both queries

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12686/qa_c67-722110.html

HTH

Rasika

View solution in original post

1 Reply 1

3850 won't support flexconnect. Also you have to directly connect AP to 3850 (not via transient switches like 2960).

Refer this Q&A to find answer to your both queries

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12686/qa_c67-722110.html

HTH

Rasika

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: