cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
255
Views
4
Helpful
3
Replies

Cisco AIR-ANT2524V4C-R Exposed Ceiling Mounting

danielpepe
Beginner
Beginner

Is there a mounting plate that can connect both the base antenna and the access point in an exposed ceiling? Is there a typical exposed ceiling installation detail available? My understanding is that there would be a backbox anchored to the slab with conduit & threaded rod coming down to a backbox with mounting plate to connect the base antenna. How would the access point be mounted in an exposed ceiling?

3 Replies 3

marce1000
VIP
VIP

 

      - FYI : https://www.cisco.com/c/en/us/td/docs/wireless/antenna/installation/guide/ant2524v4c.html

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

peytonjosie3
Beginner
Beginner

To mount both a base antenna and an access point in an exposed ceiling:

Secure a backbox to the ceiling structure using appropriate anchors.
Run conduit and threaded rods from the ceiling down to the backbox for cable routing.
Attach a suitable mounting plate to the backbox for the base antenna.
Mount the base antenna securely on the mounting plate.
Install the access point directly on the ceiling structure or suspend it using brackets.
Run network and power cables through the conduit to both devices.
Ensure proper cable management for a neat appearance.
Test and configure both devices for proper functionality.
Follow safety and aesthetic guidelines for a professional finish.
Document the installation details for future reference.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: