Solved: Cisco AIR-AP1852I-B-K9C Firmware

joy.yeo · ‎01-22-2018

Hi,

i have just successfully setup my access point. But my firmware is 8.2.151.0. I cannot download the new firmware as i have bought my access through amazon and do not have a contract to download. Anyone can help me with this?

Leo Laohoo · ‎01-22-2018

Carefully read the Cisco Security Advisory called "Multiple Vulnerabilities in Wi-Fi Protected Access and Wi-Fi Protected Access II" and scroll down to the "Customers Without Service Contracts" section. Read very, very carefully the first two paragraphs with emphasis on the second paragraph.

Hope this helps.

Please don't forget to rate our useful posts.

View solution in original post

Flavio Miranda · ‎01-22-2018

Hi,

Try to contact Cisco directly. They might help you.

-If I helped you somehow, please, rate it as useful.-

Leo Laohoo · ‎01-22-2018

Carefully read the Cisco Security Advisory called "Multiple Vulnerabilities in Wi-Fi Protected Access and Wi-Fi Protected Access II" and scroll down to the "Customers Without Service Contracts" section. Read very, very carefully the first two paragraphs with emphasis on the second paragraph.

Hope this helps.

Please don't forget to rate our useful posts.