07-17-2013 01:36 AM - edited 07-04-2021 12:26 AM
I have a question about the new Cisco AP 1530 series (AIR-CAP1532I or E).
On the data-sheet it's written controller-based. But is it also compatible with flex-connect mode?
Because I use a 7500-flex WLC.
AP data-sheet:
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps12831/data_sheet_c78-728356.html
Thank you,
Jerome
Solved! Go to Solution.
07-17-2013 04:30 AM
That should be supported in the v7.5 code when that comes out.
Sent from Cisco Technical Support iPhone App
07-17-2013 04:30 AM
That should be supported in the v7.5 code when that comes out.
Sent from Cisco Technical Support iPhone App
07-17-2013 08:02 AM
Thanks!
I just got the information this AP is planned for Q4-2013... I did not knew that.
So this could explain it's not on the supported list yet.
Thank you,
Jerome
12-06-2013 01:46 AM
Does anyone really knows? 7.5 is out, anyone had tried AP 1530 in FlexConnect mode?
01-11-2014 04:10 PM
It's supported on the 7.6 now.
Best Rgds,
Jerome
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: