11-24-2022 03:56 AM
Hi,
Is it possible to set up TLS 1.1, 1.2, or 1.3 with the Cisco Cisco Aironet 2600 serie?
If so, do you know how to do it?
The last firmware release 15.3.3-JF15 ; does not mention TLS versions compatibility
https://www.cisco.com/c/en/us/support/wireless/aironet-2600-series/series.html#~tab-downloads
Solved! Go to Solution.
11-28-2022 06:40 AM
Are you sure that the captive portal is not an external 3rd party tool they are using?
11-24-2022 07:49 AM
Actually 1.2 tls is working once you have passed the captive portal which is only 1.0, how can we change the captive portal from 1.0 to 1.2 please?
11-25-2022 05:08 AM
Are you using the AP in autonomous mode or with WLC?
If with WLC what model of WLC running what version of software?
Who provides your captive portal? (that's who you should be talking to about the captive portal capability)
11-28-2022 06:34 AM
WLC I guess as its a building more than 8 access point I would say. As for the firmware I can't answer as I do not work for the network departement of the company, I am only asking this because they say that the captive portal cannot configured to use TLS 1.2.
It is annoying that people need Internet explorer with TLS 1.0 activated to reach the captive portal if this one could be configured to use 1.2 TLS
11-28-2022 06:40 AM
Are you sure that the captive portal is not an external 3rd party tool they are using?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide