10-02-2016 12:14 AM - edited 07-05-2021 05:54 AM
Hi everybody
in Cisco aironet 2800 datasheet , 2 model of part number exist :
● AIR-AP2802I-x-K9: Dual-band, controller-based 802.11a/g/n/ac
● AIR-AP2802I-x-K9C: Dual-band, controller-based 802.11a/g/n/ac, configurable
what difference between these part numbers and what mean configurable ??
Thanks
Solved! Go to Solution.
10-04-2016 12:16 AM
Hi Amir,
The K9C option means that the AP can be ordered with mesh k9w8 image preinstalled.
There is no other difference. So if you are going to use it in a mesh environment you will need to order it as K9C.
Best Regards,
Learn from the Best To be the Best!
Join us on LinkedIn to get access to our free tech-talks and training resources!!!
10-04-2016 12:16 AM
Hi Amir,
The K9C option means that the AP can be ordered with mesh k9w8 image preinstalled.
There is no other difference. So if you are going to use it in a mesh environment you will need to order it as K9C.
Best Regards,
Learn from the Best To be the Best!
Join us on LinkedIn to get access to our free tech-talks and training resources!!!
12-15-2016 09:14 AM
Hi,
I thinkg AIR-AP2802I-x-K9C comes with the Mobility Express feature (you can use the AP as wireless controller up to 25 APs), while the simple version comes just as LWAP (can be used just with a controller).
Kind regards,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: