08-13-2018 11:42 AM - edited 07-05-2021 08:58 AM
Hello
I have bought a used Cisco AP 1100, with console port.
I have downloaded putty to program in, but when i enter ENABLE, it ask for at password, witch i can´t type, have tried both with letters and numbers, i just can´t type anything in the command.
Please help, Thanks
08-13-2018 02:11 PM
I think you have picked a too old AP to work with.
If you buy an Cisco AP for home use, make sure it comes with Autonomous IOS (k9w7), otherwise you need a wireless lan controller to manage it or convert it to autonomous. without cisco support, you cannot download these required image for conversion describe in below.
https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion
Cisco 3502, 3602 are some models you may be able to find out for reasonable pricing.
HTH
Rasika
*** Pls rate all useful responses ***
08-13-2018 03:15 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide