I have an Access Point AIR-AP1832I-E-K9
I'm trying to do the upgrade to ME but when I start the process:
ap-type mobility-express tftp://XXX.XXX.XXX.X/AIR-AP1830-K9-8-5-151-0.tar
Starting the ME image download...
It may take a few minutes to finish download.
If it is longer, please abort command, check network connection and try again
##########[*08/07/2018 12:35:16.7298] ################################## 100.0%
The download starts at a 100% and while it's upgrading or whatever it's sending Discovery requests out as well. Sometime during the upgrading process it says MWAR failed 35 times rebooting AP
- tftp-server flash:AIR-AP1830-K9-8-5-151-0.tar and both tftp flash:AIR-AP1830-K9-8-5-151-0.tar are both present in the router, I don't know if they are the same thing or not?
- Firewall should allow the tftp server to work
- DHCP server should also be working as it's giving the ips to the AP and my laptop
- After starting the command it takes about an hour for it to complete
- AP reboots after a while presumably when it's done with the process. After that I check using "show ver" and see nothing has changed? (connected to my ISR1100 with PoE)
Anyone know what the problem might be?
Solved! Go to Solution.
Hi,
Try upgrading the AP directly from your PC. You can find a guide here https://www.semfionetworks.com/blog/convert-a-cisco-capwap-ap-to-a-mobility-express-ap
Hi,
Try upgrading the AP directly from your PC. You can find a guide here https://www.semfionetworks.com/blog/convert-a-cisco-capwap-ap-to-a-mobility-express-ap