cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3597
Views
5
Helpful
17
Replies

Cisco AP1121G Workgroup Bridge Problem

rnlaberge
Level 1
Level 1

Hello,

For reference I have attached the following:

Network Diagram

Ping Results Table

Configurations for 1811 router, ap1121g root access point, ap1121g wgb.

I am seeking assistance with the following problem.

Referring to the attached network diagram, I cannot communicate past the ap1121g-wgb in either direction.

Also attached is a result table of ping attempts through the ap1121wgb from each side.

I don't have a problem with the wireless connections. The ap1121g's associate ok.

Based on the ping results the problem appears to be in the ap1121g-wgb configuration, but I have run out of ideas.

The following two cisco documents have been my main reference, besides the cisco command lookup site.

http://www.cisco.com/en/US/customer/products/hw/wireless/ps430/products_configuration_example09186a00805b9b87.shtml

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1-chap19-wgb-standby.pdf

Any insight will be greatly appreciated.

Thanks...

17 Replies 17

Robert,

That's great news and it's good to know the 1121s are doing WGB successfully. Please do let us know if you discover what is breaking the WGB functionality. Happy bridging!

Justin