08-07-2013 04:09 PM - edited 07-04-2021 12:36 AM
Hello guys!
I have client that has a UniFi LR device, he ask us to design a wired-wireless solution to expand his network, for now he has this:
His LAN---Unifi LR (ubicuiti) device,
And he wants to expand his netowrk using this way:
wired link Wireless Link wired link
LAN------------------UnifiLR==================Cisco AP?------------------Switch (just 8 wired users)
distance between 2 wireless devices is aprox 15meters
First Question: Is UnifiLR device able to act as a Repiter/Bride using Cisco AP? or just APS Cisco works with his similars?
Second Question: In case of not, What Cisco complete solution could solve the requirement?
3rd Q: any design guide, tips, considerations or literature for the possible implementation?
4rd: What level of performance (poor/regular/good) is comonly in this kind of implementations for wired clients?
08-07-2013 04:16 PM
First Question: Is UnifiLR device able to act as a Repiter/Bride using Cisco AP? or just APS Cisco works with his similars?
Stick to the same manufacturer. Don't mix them, particularly when dealing with wireless bridges.
08-08-2013 07:52 AM
Hi Leo
Then.. what is the pourpouse of the Standars?...
08-08-2013 05:33 PM
Then.. what is the pourpouse of the Standars?...
Purpose of the Standards? Standards are like laws of the land. You can abide by them or not. It's your call.
Same thing with wireless Standards. Some companies follow and some just don't.
08-16-2013 11:45 AM
Solution:
You should use the AP from the same manufacture for your current deployment and in you current deployment i would recommend that you use a cable setup rather then following the wireless solution as the distance is not far.
Following are the required answers to the query
1.Always use the same vendor equipment to act as Repiter/Bridge
2.Cisco 1600/2600/3600 series AP is an optimal solution
3.It is recommended that you use 3600 AP (but is depends upon the type of application used by clients and number of users).Also you did not specify the devices models so that a suggestion about the network desgn can be provides and link usage of the clients.
4.well the newer AP have better through put and upcumming standared such as 802.1 ac is slowing becoming the replacement for the wired so the quality will depends on the data usage.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide