Cisco Cisco 886VA wlan card not fund

[youness10]

hello ;

I have a cisco Router Cisco 886VA , I can't fin the AP on the Router .

can some one help me to configure wlan on the Router .

Thank's.

[Seb Rupik]

Hi there,

You need to access the wireless interface via the service-module command. Follow the steps here:

https://www.cisco.com/en/US/docs/routers/access/800/880/software/configuration/guide/880_basic_device_wireless_config.html#wp1052755

cheers,

Seb.

[youness10]

Hello Seb ;

the command interface wlan-ap0 it's not not recognized by IOS .

also I cant fund the wlan card when I do show inventory .

[Leo Laohoo]

Look at the product ID or the output to the command "sh inventory". If the product ID doesn't contain the letter "W" then the product does NOT have a built-in AP.

[youness10]

Hello , 

I can't  the letter "W" then the product .

I joint the show inventory .

but there Link 2.4 on surface og the router .

[youness10]

hello ;

please see the attached image.

Thank you .

[Leo Laohoo]

Can you have a look at the back. Are there any antenna ports? If none, then this model doesn't have a built-in AP.