01-28-2021 11:39 PM - edited 07-05-2021 01:07 PM
Hi,
wlc model 5508
ios :8.5.135.0
AP Model:3700/3800/2600
AP-Mode: Flex connect
We have configured the flex group in our infra.
Due to link flaps the AP's disassociates from WLC and joins back to the wlc.
But it is not joining to the respective flex group.
any one help us ,what would be the reason for AP not joining to flex group.
Regards,
Anjana
01-28-2021 11:47 PM
- Check controller logs when this happens and on the AP logon and issue show logging
M.
01-29-2021 10:38 AM
Is your controller in N+N Design? if yes make sure both the controller configuration is consistent like AP groups, Flex groups, WLAN profile etc. if not then it lands on its own and it would be unpredictable and changes all the policies.
Also make sure good practice is followed like AP group = Flex Group
Setting up HA SSO would remove such management overhead.
01-29-2021 11:05 AM
If you have more than one controller, it does seem like the ap joins another controller that is not configured identical to the controller that it lost connection to. Now if you have a single controller, then that is an issue and I would look at the bug toolkit to see if there is a bug listed for the issue you are having.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide