cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3958
Views
10
Helpful
5
Replies

Cisco ISE web auth Splash page

brettlarkins
Level 1
Level 1

Was wondering if the splash page offered by Cisco ISE can be customized, or if it's necessary to redirect to an External server?

Currently using a downloaded web auth pass-through splash page setup for guest access on a 5508 WLC, but have been asked to move this feature off the WLC and onto the ISE and then customize the page with company logo's and a couple graphics.

Is this possible?

Thanks in advance...

1 Accepted Solution

Accepted Solutions

Yes, but you will definitely need ISE 1.3. When creating the guest portal in ISE you would select the "Hotspot Guest Portal" option. This allows guest users to just agree to an AUP (Acceptable Use Policy) and then get Wi-Fi access.

And yes, you can also perform posture assessment:

http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-software/118741-configure-ise-00.html#anc9

 

Thank you for rating helpful posts!

View solution in original post

5 Replies 5

nspasov
Cisco Employee
Cisco Employee

Yes, you can customize the guest page on ISE. I would recommend going with v1.3 since that version offers the easiest method of customizing the portal. Prior to 1.2 you had to manually create HTML files, upload them and link them to the login flow process. 

 

Thank you for rating helpful posts!

 

 

Great info... thanks!

And would I be able to create just a pass-through splash page where users only need to accept an acceptable use policy and not enter any username/password or do any posturing?

Yes, but you will definitely need ISE 1.3. When creating the guest portal in ISE you would select the "Hotspot Guest Portal" option. This allows guest users to just agree to an AUP (Acceptable Use Policy) and then get Wi-Fi access.

And yes, you can also perform posture assessment:

http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-software/118741-configure-ise-00.html#anc9

 

Thank you for rating helpful posts!

Just wanted to follow up and say thanks again... the link you provided for the walk-through is very helpful!

No problem! Glad I could help! :)

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: