10-23-2020 12:06 AM - edited 07-05-2021 12:41 PM
Hello everyone,
Hope you are doing well.
I am using Meraki AP MR33 in my environment and they are connected to fa port of my switch.
I am using Iperf3, I have been getting 15-20 Mbits/sec bandwidth between 2 users in wireless and in wired I am getting 93-94 Mbits/sec.
Is the wireless bandwidth alright, is there some way that I could increase the bandwidth in wireless.
Solved! Go to Solution.
10-28-2020 12:26 AM
10-23-2020 03:37 AM
- Check if this document can be useful :
M.
10-23-2020 06:46 AM
10-25-2020 09:40 PM - edited 10-25-2020 09:49 PM
Hi Scott
Good day.
Currently I am using it on Auto, I will be testing soon and sharing the results here, but what if I connect my Aps to Gig port, will I get better results?
10-26-2020 06:55 AM
10-25-2020 11:00 PM
10-26-2020 06:57 AM
10-27-2020 11:39 PM
10-28-2020 12:26 AM
10-28-2020 12:31 AM
Thank you Scott.
10-26-2020 09:13 AM
And for AC you might want to enable 80 MHz on the 5 GHz, if the environment (wireless density) allows.
10-27-2020 11:52 PM
I have around 65-70 clients and I have 3 APs, do you recommend to enable 80 MHz on 5GHz?
10-28-2020 12:23 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: