cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
850
Views
5
Helpful
10
Replies
UT_games
Beginner

Cisco PoE+ AP with Antenna Power Requirements

Hey everyone,

 

Question: Does an antenna require more power to the AP via PoE+?

Ultimate Question: I know that PoE+ will power the IW-6300 AP, but will PoE+ power the IW-6300 AP with the Air-ANT2566P4W-R Antenna?

 

Below is our current design.

 

">" means connected to

 

Cisco IE-3200 switch > IW-6300 AP > Air-ANT2566P4W-R Antenna

 

The Cisco IE-3200 supports PoE+

        - Estimated PoE+ output to the Powered device would be approx 25W

 

The IW-6300 has a PoE+ / UPOE auto sense inbound port

       - I can't find baseline power needed to run this AP. Looked through the datasheet

 

The Air-ANT2566P4W-R Antenna

       - I don't see in the datasheet anything about power required.

 

I know that PoE+ will power the IW-6300 AP, but will PoE+ power the IW-6300 AP with the Air-ANT2566P4W-R Antenna?

 

Thanks in advance!

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions

yes, The listed AP power requirement including what power needs for those radio chains. The antenna itself does not require active power

 

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

10 REPLIES 10
Rasika Nayanajith
VIP Mentor