03-08-2014 12:11 PM - edited 07-05-2021 12:22 AM
Hi Team,
I have following BOM
Cisco Prime Infrastructure | ||
R-PI-1.2-K9 | Cisco Prime Infrastructure 1.2 | 1 |
R-PI-1.1-500-K9 | Prime Infrastructure 1.2 Software - 500 Device Base Lic | 1 |
L-PILMS42-500 | Prime Infrastructure LMS 4.2 - 500 Device Base Lic | 1 |
L-PINCS12-500 | Prime Infrastructure NCS 1.2 - 500 Device Base Lic | 1 |
PRIME-NCS-APL-K9 | Cisco Prime Network Control System Hardware Appliance | 1 |
PI-APL-IMAGE-1.2 | Cisco Prime Infrastructure 1.2 Appliance Software | 1 |
Pls let me know if we have both NCS and LMS preinstalled with Cisco Prime Infrastructure 1.2 Appliance Software orwe need seperate appliance or server for LMS 4.2.
Regards
03-09-2014 08:01 PM
LMS and PI has to be installed on seperate severs. Basically, both are ova files and need to be installed in a VM environment.
03-10-2014 05:02 AM
Hi Scott,
Thanks for the response but I got to know that LMS and NCS are combined in single ISO image from PI 1.2 and can be installed on the same physical NCS appliance.
Can you pls check this.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide