cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
565
Views
0
Helpful
4
Replies

Cisco Prime Infrastructure 1.3 - how to save config on WLCs

Difan Zhao
Level 5
Level 5

Hi experts,

Can't seem to find the place to do this... Help?

Thanks,

4 Replies 4

Stephen Rodriguez
Cisco Employee
Cisco Employee

Controllers > select the WLC(s). in the drop down menu save config to flash.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Thanks however I can't find that drop down menu that I used to see in older version of NCS... Please see my attached image... Thanks

Hi Difan:

In Prime Infrastructure's Device Work Center, you have to drill down through the Device Groups to Device Type > Wireless Controller, and then the panel of buttons will change.  Once you select one or more wireless LAN controllers, the Configure button will become enabled.  Click the Configure button, and choices will appear that include Save Config to Flash.

Ravi Singh
Level 7
Level 7

Please go to the below link it decribe all the task which is related to WLC.

http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/ctrlcfg.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: