We are running Cisco Prime Infrastructure 3.0 . We are wanting email notifications for Switches and Hubs when one goes down and up within a minute. We have selected the option Switches and Hubs with severity level as Critical under the Email Notification. We are testing with a non production switch. When we disconnect the link we see the alarm in the Alarm Summary but it is 5 minutes or longer before we receive a email notification. Is there a setting that can be set to receive a email within a minute of the switch going down or up?
No there isn't a place to change the time for email notification. Emails are sent when an alarm occurs that matches the categories and the severity levels you select. - http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/administrator/guide/PIAdminBook/config_server_settings.html#63370
I would work with TAC to see what the issue is, I don't believe Prime is at fault for the delay but I don't know your network.
Securing devices without 802.1X
PSK (Pre-Shared-Key) WLAN is widely used for consumer & enterprise IoT onboarding as most of IoT device doesn’t support 802.1X. While PSK WLAN provides an easy way to onboard IoT, it also introduces challenges as...
Due to the certificate expiration, any new Control and Provisioning of Wireless Access Points (CAPWAP) or Light Weight Access Point Protocol (LWAPP) connection will fail to establish. The main feature that is affected will be the Acce...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
Community Live video- All Things LTE…4G, 5G and Whatever’s Next
(view in My Videos)
(Live event - formerly known as Webcast- Tuesday 10 November, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Tuesday 10h, November 2020 at...