04-08-2013 08:13 AM - edited 07-03-2021 11:52 PM
I am running the demo of the virtual WLC and have one 1142N AP connected to it. I have two WLAN's created and they are configured to broadcast their SSID's. However, when I look on my laptop or Android, I cannot see either of them. I checked the AP to see if it has the WLAN's on it and it does. I did this by going to Wireless -> Access Points -> Radios -> 802.11a/n AP Interfaces -> Details. Under Station Configuration Parameters -> Number of WLAN's, there are 2, which is correct.
I had this demo running on VMware workstation and had some bridging issues with it and thought that was the issue. I now have it running on ESX5.1 and am still having this issue. I am at a loss as to what is causing this problem.
One other note, the AP is receiving power through a power injector. Not sure if that makes a difference or not.
TIA for any help.
Dan
04-08-2013 08:19 AM
what are the WLAN ID's for them? If you created them as => 17, you need to create an AP group
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
04-08-2013 08:30 AM
I actually figured it out. I needed to put the AP in flexconnect mode and not local. Would be nice if they removed the local option and made flexconnect the default setting.
04-30-2018 03:55 AM
08-21-2018 09:14 AM - edited 08-28-2018 12:11 AM
I Found in document vWLC can working only on FlexConnect
06-18-2019 07:34 PM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: