Is it possible to create a virtual interface in Cisco's Aironet device for the management purpose. For example, I like to create following vlans:
Vlan 2 for Managment
Vlan 3 for data
Vlan 4 for voice
With the basic layer 2 concept, for example, Cisco 2950 switches, one can create virutal interface,
and assign an ip address for the managment purpose. Can same thing be done with Wireless box?
From the Web GUI, express setup page, I can assign an IP Address, but this is not what I want to do. I like to create a virtual interface 2 and then assign an IP address. Is it possible from gui or even
CLI.
Please refer to a good link for step by step configuration, if possible
Thanks
