We recently bought a new 371 access point for some laptops and phones in our building, and I'm having trouble with it. So far I have done the following to it:
Changed default username and password
Set up 5Ghz and 2.4Ghz broadcast networks
Set radio broadcast to on
Set DHCP info to automatic
When I plug the access point into where our old one was, the link lights (except wireless light) turn amber and the system does not receive any DHCP info. I had assumed this could be a DNS issue, but even with the correct DNS defined, it still doesn't receive any info. Does anyone have any suggestions? Thanks!
OverviewConfigurationCreate a CSV File With a List of All the APs Joined to the 9800Verifying theCSV File Will Work with the EEM AppletsBreakdown of the Enabling and Disabling EEM AppletsMonitoring the Applet
On the Cisco Catalyst 9800 Series WL...
It’s been a long road for our AireOS wireless controllers. In fact these products have been around Cisco in some form since 2005. As you may have heard, Cisco made the decision to End-of-Sale (EOS) these products last month.
That means that these AireOS ...
Hello Community, I have an issue where APs do not connect to the WLC. Connection is made over VPN. Until yesterday all 3 APfailed with below errors. We change the LAN connection to a cisco router and now one of the AP magically connected to the...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
Cisco Champion Radio · S8|E6: Fastlane+ Optimizes Network and Device Communication
Cisco Fastlane+ is a co-developed solution with Apple that significantly improves the experience of any Wi-Fi 6 capable iPhone or iPad connected to a Cisco Catalyst 9130 A...