02-07-2013 06:45 AM - edited 07-03-2021 11:29 PM
Hi
We need to install some wireless AP's and will not be installed on a POE switch. We have purchased the invertors and I believe that I need to add a line into the config.
Is the line below correct to enter into the config if you have an AP using a POE invertor?
power inline negotiation prestandard source
Thank you
02-07-2013 06:47 AM
That is correct for autonomous APs.
Sent from Cisco Technical Support iPhone App
02-07-2013 07:43 AM
OK
So when is this used for?
power inline negotiation injector override
02-07-2013 07:52 AM
power inline negotiation injector override is the command to use if you have a power injector. The other one is for a POE switch that doesn't support 802.3af power.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide