01-28-2013 02:43 AM - edited 07-03-2021 11:26 PM
Hello
Recently we came to know that 1142 N is end of sale in US and not recommended for purchase in europe. We have to purchase new Access points for our enterprise.
Which model should i go with? Is Aironet 2602 the one that we should be buying?
We are looking for 802.11n capability and pretty much ability to work the same way as 1142N
thanks for confirming...
Solved! Go to Solution.
01-28-2013 06:16 AM
Yes you can go with 802.af. The AC module will require 20mW PoE though.
Sent from Cisco Technical Support iPhone App
01-28-2013 06:19 AM
Powering Options
AP3600 without add-on module
• 802.3af Ethernet
• Cisco AP3600 Power Injectors (AIR-PWRINJ4=)
• Cisco AP3600 Local Power Supply (AIR-PWR-B=)
AP3600 with an add-on module
• Enhanced Power over Ethernet (PoE), 802.3at PoE+
• Cisco AP3600 Power Injectors (AIR-PWRINJ4=)
• Cisco AP3600 Local Power Supply (AIR-PWR-B=)
Sent from Cisco Technical Support iPhone App
01-28-2013 01:13 PM
Sure that is fine. Personally I don't like a mixed environment. Harder to troubleshoot especially if there are issues with a certain code and AP model. I think spectrum is just like monitor mode. 1 every 5-6 AP's.
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: