Cisco wireless

[TGF_Cisco]

Hello

Recently we came to know that 1142 N is end of sale in US and not recommended for purchase in europe. We have to purchase new Access points for our enterprise.

Which model should i go with? Is Aironet 2602 the one that we should be buying?

We are looking for 802.11n capability and pretty much ability to work the same way as 1142N

thanks for confirming...

[Scott Fella]

Yes you can go with 802.af. The AC module will require 20mW PoE though.

Sent from Cisco Technical Support iPhone App

[Scott Fella · Accepted solution]

Powering Options
AP3600 without add-on module
• 802.3af Ethernet
• Cisco AP3600 Power Injectors (AIR-PWRINJ4=)
• Cisco AP3600 Local Power Supply (AIR-PWR-B=)

AP3600 with an add-on module
• Enhanced Power over Ethernet (PoE), 802.3at PoE+
• Cisco AP3600 Power Injectors (AIR-PWRINJ4=)
• Cisco AP3600 Local Power Supply (AIR-PWR-B=)


Sent from Cisco Technical Support iPhone App

[Scott Fella]

Sure that is fine. Personally I don't like a mixed environment. Harder to troubleshoot especially if there are issues with a certain code and AP model. I think spectrum is just like monitor mode. 1 every 5-6 AP's.

Sent from Cisco Technical Support iPhone App