Cisco WLC Configure for Wireless IPv6 Client Support

[Rps-Cheers]

HI All,

Thesedays,we need deployment ipv6 in wireless network, but it's not clearly about cisco documents as below:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/IPV6_DG.html#pgfId-76850
So, i ask whether somebody has the example or guide about deployment ipv6 client support . Whether share it to me ?

Thx

[marce1000]

        - Consider the complete  document to start with. 

 M.

[Rps-Cheers]

HI marce1000

There seems to be no hyperlink

[marce1000]

                        https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/IPV6_DG.html

 M.

[Rps-Cheers]

thank you for your reply. I have read this document before, I only have to try it, I don't know if it will succeed.

[patoberli]

IPv6 for clients should work fine today, if that is the only requirement. Just make sure it's enabled correctly on the WLC.