11-10-2013 05:00 AM - edited 07-04-2021 01:14 AM
Im not able to see the wireless clients IP information when i click on clients session. i can see client mac,ap name nd ssid bit not the IP information.Im using controller 2504 running firmware 7.4
Sent from Cisco Technical Support iPhone App
11-10-2013 12:33 PM
My guess is #2....
11-10-2013 12:54 PM
If #2,
from the 2504 WLC run the command debug mac addr
11-10-2013 01:37 PM
Clients are getting ip.But for monitoring purpose it should be shown in clients sessiom on controller along with other details.But other details are showing ip details row is not therw.
Sent from Cisco Technical Support iPhone App
11-10-2013 03:02 PM
How about fromt the CLI of the 2504? - show client detail
11-10-2013 03:04 PM
Also, what version of 7.4?
11-10-2013 07:50 PM
Does the WLAN have the *Require DHCP address** configured?
That will make sure each client obtains the IP and learns it during the process.
If the client doesn't receive an IP address, ensure that the interface on the WLC has a DHCP server configured as to where to send all DHCP requests to.
**Please rate post if helpful**
11-11-2013 12:58 AM
11-11-2013 12:59 AM
11-11-2013 02:53 AM
Hi Ameen,
Please SSH into the controller and look at output from the following command:
show client summary
Also please copy and paste the contents of the command:
show sysinfo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide