09-07-2011 05:18 PM - edited 07-03-2021 08:41 PM
Hey guys, I bought 3 of the Aironet 1231g access points and cannot get any clients to connect to them. I have tried everything from an Iphone, Droid2, Win 7 and XP laptops with built in wireless G cards. All say that they cannot connect to the wireless network. I have two setup currently, one on Vlan 1 that I have configured the way I want with WPA2 enterprise. The other one is just one I setup while playing around.
Solved! Go to Solution.
09-07-2011 05:30 PM
Config Looks messed up!! Please change the same like below..
dot11 ssid 2BCMember
vlan 2
authentication open
no guest-mode
mbssid guest-mode
no mobility network-id 2
authentication key-management wpa
wpa-psk ascii 7 070224414C0C0B5547
!
dot11 ssid 2BCOffice
vlan 1
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa
mbssid guest-mode
no infrastructure-ssid optional
no mobility network-id 1
!
!
!
!
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption vlan 1 mode ciphers aes-ccm
!
encryption vlan 2 mode ciphers aes-ccm
Lemme know if this helps and please dont forget to rate the usefull posts!!
Regards
Surendra
09-07-2011 05:30 PM
Config Looks messed up!! Please change the same like below..
dot11 ssid 2BCMember
vlan 2
authentication open
no guest-mode
mbssid guest-mode
no mobility network-id 2
authentication key-management wpa
wpa-psk ascii 7 070224414C0C0B5547
!
dot11 ssid 2BCOffice
vlan 1
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa
mbssid guest-mode
no infrastructure-ssid optional
no mobility network-id 1
!
!
!
!
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption vlan 1 mode ciphers aes-ccm
!
encryption vlan 2 mode ciphers aes-ccm
Lemme know if this helps and please dont forget to rate the usefull posts!!
Regards
Surendra
09-07-2011 07:46 PM
So I'm only changing the parts mentioned in your reply, correct?
09-07-2011 07:48 PM
yes please!!
Regards
Surendra
09-12-2011 04:10 PM
Sorry for being late getting back to you on this, it worked! I have gone through the setup from scratch now from the beginning and I think I just tried too much getting it to work, that I just messed it up more. Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide