Hello everyone.
I hope you and your families are very well, this post is only about your experience and your knowledge about the integration in CMX Detect and locate module with the airistaflow products. This is because I currently perform location based on BLE beacons with APs 4800 and a CMX 10.3. But currently we have a new project that include Airistaflow T4 and T5 for WIFI location, but i cannot find any documentation related the compatibility with these new devices, I mean, I know that these tags are 802.11bgn capable but I really don’t know if there is a documentation or a compatibility matrix that probe the good performance between these and the CMX, I consulted two different post in these community.
https://community.cisco.com/t5/mobility-discussions/cmx-tags/td-p/3515428
https://community.cisco.com/t5/mobility-discussions/cisco-cmx-infrastructure-with-active-rfid-tags/td-p/3449661
In both post the answer is the same ( No answer ) an only refers to design zone and WLC release notes, but in these documents there is no information related to the compatibility with these devices.
So really appreciate your help if you know or maybe if you have a solution with these technology, by the way, I consulted two post in devnet zone, about the "Solution Partner Program" and there are two post about these two TAGs of Airista Flow, but there are not information related to CMX compatibility.
https://developer.cisco.com/ecosystem/spp/solutions/153904/
https://developer.cisco.com/ecosystem/spp/solutions/153908/
So I wish you are very well and hope anybody can help me.
Keep safe.
Regards.
