cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2078
Views
5
Helpful
6
Replies

Compatibilty for AIR-ANT2451NV-R=

lnoriega64
Beginner
Beginner

Hi,

A customer needs (5) AIR-AP1252AG-A-K9 access points and is asking for the AIR-ANT2451NV-R= compatibility. I get an error when trying to add the antena in Dynamic Configurator and CCW also.

The customers needs 802.11 a/g/n  service. Are both products compatible?

Thank you

1 Accepted Solution

Accepted Solutions

Stephen Rodriguez
Cisco Employee
Cisco Employee

From looking at:

http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/at_a_glance_c45-513837.pdf

It would appear that they are compateble.  What error are you getting in the DCT?

Cheers,

Steve

Please remember to rate helpful posts

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

View solution in original post

6 Replies 6

Stephen Rodriguez
Cisco Employee
Cisco Employee

From looking at:

http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/at_a_glance_c45-513837.pdf

It would appear that they are compateble.  What error are you getting in the DCT?

Cheers,

Steve

Please remember to rate helpful posts

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

The error message is:

Cisco Configuration Tool

Product Not Found

The item AIR-ANT2451NV-R= you have entered is not a valid option for this model.  Please check your entry and try again.

The configuration tool link is:

https://apps.cisco.com/qtc/config/jsp/configureHome.jsp

Maybe you can try to see if you get same error. The product I'm trying to configure is AIR-AP1252AG-A-K9.

Thanks

Luis

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend

ANT2451NV is compatible with the 1252 ... as long as you have both radio modules.

I Think this product number includes both radios, or not?

AIR-AP1252AG-A-K9

802.11a/g/n-d2.0 2.4/5-GHz Mod Auto AP; 6 RP-TNC; FCC

Thank you for your comments.

Luis

that part AIR-AP-1252AG-A-K9, is for both radios.  I'm having issues with my account, so I am not able to access the DCT, but I would try the part number as AIR-ANT2451NV-R, leave off the "="

Cheers,

Steve

Please remember to rate helpful posts

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

I now have the response from Cisco Support:

"AIR-ANT2451NV-R= is not included on the antenna options though for AIR-AP1252AG-A-K9 configuration on DCT. It is supported on AP 1252AG with Cisco IOS Release 12.4(21a)JA1 based on the document that i sent you. AIR-ANT2451NV-R= has to be ordered separately.

Please check the links below for addional ingormation.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6973/ps8382/product_data_sheet0900aecd806b7c5c.html
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0apcfg.html"

I think that's good enough for me.

Thank you all.

Luis

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: