01-11-2011 11:08 AM - edited 07-03-2021 07:39 PM
Hi,
A customer needs (5) AIR-AP1252AG-A-K9 access points and is asking for the AIR-ANT2451NV-R= compatibility. I get an error when trying to add the antena in Dynamic Configurator and CCW also.
The customers needs 802.11 a/g/n service. Are both products compatible?
Thank you
Solved! Go to Solution.
01-11-2011 12:29 PM
From looking at:
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/at_a_glance_c45-513837.pdf
It would appear that they are compateble. What error are you getting in the DCT?
Cheers,
Steve
Please remember to rate helpful posts
01-11-2011 12:29 PM
From looking at:
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/at_a_glance_c45-513837.pdf
It would appear that they are compateble. What error are you getting in the DCT?
Cheers,
Steve
Please remember to rate helpful posts
01-11-2011 01:16 PM
The error message is:
Cisco Configuration Tool
Product Not Found
The item AIR-ANT2451NV-R= you have entered is not a valid option for this model. Please check your entry and try again.
The configuration tool link is:
https://apps.cisco.com/qtc/config/jsp/configureHome.jsp
Maybe you can try to see if you get same error. The product I'm trying to configure is AIR-AP1252AG-A-K9.
Thanks
Luis
01-11-2011 12:51 PM
ANT2451NV is compatible with the 1252 ... as long as you have both radio modules.
01-11-2011 01:23 PM
I Think this product number includes both radios, or not?
AIR-AP1252AG-A-K9
802.11a/g/n-d2.0 2.4/5-GHz Mod Auto AP; 6 RP-TNC; FCC
Thank you for your comments.
Luis
01-11-2011 02:30 PM
that part AIR-AP-1252AG-A-K9, is for both radios. I'm having issues with my account, so I am not able to access the DCT, but I would try the part number as AIR-ANT2451NV-R, leave off the "="
Cheers,
Steve
Please remember to rate helpful posts
01-11-2011 03:26 PM
I now have the response from Cisco Support:
"AIR-ANT2451NV-R= is not included on the antenna options though for AIR-AP1252AG-A-K9 configuration on DCT. It is supported on AP 1252AG with Cisco IOS Release 12.4(21a)JA1 based on the document that i sent you. AIR-ANT2451NV-R= has to be ordered separately.
Please check the links below for addional ingormation.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6973/ps8382/product_data_sheet0900aecd806b7c5c.html
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0apcfg.html"
I think that's good enough for me.
Thank you all.
Luis
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: