04-10-2013 03:21 PM - edited 07-03-2021 11:53 PM
In my Job, some computers is connecting to AP that is farthest, But there are two APS closer and the signal gets too low, the computer only connects to the closest AP if I disconnect and reconnect
I have 2 controllers series 2500
model AIR-CT2504-K9
version 7.0.116.0
APs AIR-LAP1142N-T-K9
can anyone help me with this issue?
Solved! Go to Solution.
04-10-2013 04:21 PM
The decision to which AP to connect to is done by the computer's wireless NIC.
Upgrade the firmware of the wireless NIC is your first step.
What are your wireless NIC's model?
04-10-2013 04:55 PM
04-10-2013 04:21 PM
The decision to which AP to connect to is done by the computer's wireless NIC.
Upgrade the firmware of the wireless NIC is your first step.
What are your wireless NIC's model?
04-10-2013 04:51 PM
hello,
my nic's model is Realtek RTL8192CE Wireless LAN 802.11n PCI-E NIC
04-10-2013 04:55 PM
Upgrade the NIC drivers.
Have you read this?
04-10-2013 06:06 PM
Leo is right:) upgrade the driver and test again.
Sent from Cisco Technical Support iPhone App
04-11-2013 05:00 AM
Thanks, I Updated the nic drivers and it's working now properly
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide