Configuring AIR-WLC4402-50-K9 through CLI

[decrypted08]

I have many  AIR-WLC4402-50-K9  devices to configure and the cli is frusterating- does anyone have a link to a step by step document that walks through assigning an IP, SSID, and enabling the radios using the cli?  I cant seem to find one that works completly.  I just need to assign it an ip so I can use the web gui!

Thnaks

[Surendra BG]

dont assign IP to "interface dot11 0 "

it should be like this..

nterface Dot11Radio0
no ip address
no ip route-cache
!
ssid test
!
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled...

[decrypted08]

To clafiry-

1: I am conencted to the AP through a console cable-

2: I am trying to gain web gui access wirelessly

3: the ap is configured as so:

ap#show conf
Using 1498 out of 32768 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
enable secret 5 $1$hDfR$kvTnx/C3JJ0KOqrQzgwuY1
!
no aaa new-model
!
!
dot11 syslog
!
dot11 ssid GTEST
!
dot11 ssid test
!
dot11 ssid test2
!
!
!
username Cisco password 7 047802150C2E
!
!
bridge irb
!
!
interface Dot11Radio0
ip address 10.10.10.100 255.255.255.0
no ip route-cache
!
ssid test
!
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio1
ip address 10.10.10.101 255.255.255.0
no ip route-cache
!
ssid GTEST
!
ssid test2
!
dfs band 3 block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 192.168.1.200 255.255.255.0
no ip route-cache
!
ip default-gateway 192.168.1.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag 1 route ip
!
!
!
line con 0
line vty 0 4
login local
!
end

bridge

At the moment I dont see anything broadcasting for me to connect to, to gain access to the web gui-  I'm sure i screwed the pooch somewhere!

[Federico Lovison]

Hi Brian,

I would suggest to modify your configuration as follows, so to be able to associate to the open SSID called "test".

Please see the changes I marked in red :

!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
enable secret 5 $1$hDfR$kvTnx/C3JJ0KOqrQzgwuY1
!
no aaa new-model
!
!
dot11 syslog
!
dot11 ssid GTEST
!
dot11 ssid test
    authentication open     # add this
    guest-mode                 # add this
!
dot11 ssid test2
!
!
!
username Cisco password 7 047802150C2E
!
!
bridge irb
!
!
interface Dot11Radio0
ip address 10.10.10.100 255.255.255.0   # remove this
no ip route-cache
!
ssid test
!
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio1
ip address 10.10.10.101 255.255.255.0    # remove this
no ip route-cache
!
ssid GTEST
!
ssid test2
!
dfs band 3 block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 192.168.1.200 255.255.255.0       # open the web-gui through this IP address
no ip route-cache
!
ip default-gateway 192.168.1.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag 1 route ip
!
!
!
line con 0
line vty 0 4
login local
!
end

I hope this helps.

Regards,

Federico

--
If this answers your question please mark the question as "answered" and rate it, so other users can easily find it.

[decrypted08]

How do I remove the IP addresses and

enable the guest and open modes for the radio?

[Surendra BG]

Hi Brian,

Here is the comand to remove the ip address..

en

conf t

int dot11 0

no ip address 10.10.10.101 255.255.255.0

end

Regards

Surendra

[decrypted08]

Thank You,

how do i enable guest and open mode for the radios?

[Surendra BG · Accepted solution]

here is the details..

en

conf t

dot11 ssid <>

guest-mode

authentication open

end

The above command will do it for you!!

lemme know if this answered your question!!

Regards

Surendra

======

Please dont forget to rate the posts which answered your question or was helpfull

[decrypted08]

TY- i was missing the authentication, even though the radios were set to beacon the ap did not know what aut

h to use...

Thanks