Configuring Guest Access using 2 LWAPs and 2504 WLC

[Yevgeniy Gritsan]

Please advise,

I have 2 APs, Cisco Aironet 1040, and 2504 WLC.

Is it possible to configure guest access (Guest SSID/VLAN and Corporative SSID/VLAN) without dedicated guest WLC in DMZ?

[Scott Fella · Accepted solution]

Yes you can. You can have up to 16 SSIDs per AP, but not suggested to have all 16. You can either use one port on the 2504 for both SSID/vlan or specify which port is for corporate and which one is for guest.

Thanks,

Scott Fella

Sent from my iPhone

[Scott Fella · Accepted solution]

Here is a good guide on the 2500

http://www.cisco.com/en/US/products/ps11630/products_tech_note09186a0080b8450c.shtml#scenarios

Thanks,

Scott Fella

Sent from my iPhone

[Yevgeniy Gritsan]

Thank you, Scott!

[Scott Fella]

No problem

Thanks,

Scott Fella

Sent from my iPhone