Confused about minimum software for WISM2

[gnijs]

Hello all,

I am confused about the cisco docs:

What is the minimum WLC/WCS version to support WISM2 controllers ?

The datasheet of WISM2 says "minimum 7.0.116.0"

http://www.cisco.com/en/US/partner/prod/collateral/wireless/ps6302/ps9798/ps11634/data_sheet_c78-645124.html

However the release notes of 7.0.116.0 do not mention the WISM2 module ?

http://www.cisco.com/en/US/partner/docs/wireless/controller/release/notes/crn7_0_116_0.html

The release notes of 7.0.220.0 do mention the WISM2:

http://www.cisco.com/en/US/partner/docs/wireless/controller/release/notes/crn7_0_220_0.html

I need to be absolutely sure as there are other software dependencies between 7.0.116.0 and 7.0.220 (regarding required MSE and Aeroscout versions).

With WCS 7.0.172.0 and WLC 7.0.116.0, will we have WISM2 support ?

regards,

Geert

[Stephen Rodriguez]

From the 7.0.116.0 release notes.

These release notes describe open and resolved caveats for release 7.0.116.0 for Cisco 2100, 2500, 4400, 5500, and Cisco Flex 7500 Series Wireless LAN Controllers; Cisco Wireless Services Modules (WiSMs), Cisco Wireless Services Module (WiSM2);

Steve

[gnijs]

I just noted that WISM2 is indeed mention in the introduction, but not in the section "Cisco Unified Wireless Network Solution Components" on page 2

[thomas03usmcsf]

-I have a Wism2 in production running 7.0.116

Sent from Cisco Technical Support iPhone App

[Sasha Tchepourko]

116 does run on both however anything later than that will require wism2. I have both wism and wism2 in production.

Sent from Cisco Technical Support iPhone App