02-18-2013 07:19 AM - edited 07-03-2021 11:33 PM
Hi
How can i connect my laptop (11n supported) to LAP 1252 with WLC 7.0.116.0?
Status: 11a enabled on wlc
DCA channel list in 11a on wlc is showing only 149 153 157 161 channels.
Sent from Cisco Technical Support Android App
02-18-2013 07:34 AM
the only thing you can do on the WLC is enable band select, this will 'infuence' the client to connect on the 5GHz band.
but other than that, you'd have to change settings on teh cleint itself.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
02-18-2013 02:45 PM
Depends if your wireless NIC can support 802.11a.
02-18-2013 03:12 PM
Also make sure you have all 3 antennas on the 5 ghz module ..
Sent from Cisco Technical Support iPhone App
02-18-2013 04:44 PM
I might as well chime in also:)
Are you worried that only those 4 channels are showing up in the DCA tab? If so, make sure you also have uni-1 and uni-2 bands also checked. Don't enable uni-2 extended.
Sent from Cisco Technical Support iPhone App
02-19-2013 12:00 AM
It supports
Sent from Cisco Technical Support Android App
02-19-2013 12:06 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: