connection changes to limited access When copying large files

[nouman_nabi]

We are having issue with all our Cicso wireless devices (AIR-AP1142N-N-K9) when connected to Windows 8 Pro users.  When copying large files, the connection changes to limited access. The initial connection to the access points is also slow for both windows 7 and windows 8 pcs.

Please let me know is there any patch to fix this issue?

Regards,

Nomi

[Scott Fella]

Make sure your in one of the supported codes for windows 8. Then also make sure that you are using either WPA/TKIP or WPA2/AES and that the windows devices are configured right. I would also disable session timeout on the WLAN.

Sent from Cisco Technical Support iPhone App

[nouman_nabi]

Hi Scott,

Thanks for your replay.

These APs are working on autonomous mode, there is no WLC.

regards

[Scott Fella]

Oh okay... well can you post your shor run-config.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[nouman_nabi]

Hi

Problem has resolved after upgrade the AP code.

Thanks for your reply Scott.

Regards,

[mmangat · Accepted solution]

Hello,

I wanted to suggest to you to upgrade the AP code. Since you have already done that and the issue is resolved. Please mark this query as 'Answered'. Thanks