cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
676
Views
0
Helpful
4
Replies

Converting 3600 from CAPWAP to Autonomious for Survey

Willem de Groot
Level 1
Level 1

Hi all,

how can I convert a 3602 AP from CAPWAP to IOS from Survey Purpose?

Thanks

Willem

1 Accepted Solution

Accepted Solutions

Scott Fella
Hall of Fame
Hall of Fame
4 Replies 4

Scott Fella
Hall of Fame
Hall of Fame

Pretty simple... here are some links and videos on how to do that:

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

Hi All,

I got it to work this way:

 

I used this Link:

Used this DHCP Server : http://www.dhcpserver.de/dhcpsrv.htm

DHCP Server set to LAN port on Laptop, with one Address

LAN Port Laptop connected to LAN Port AP

Used 3CDaemon as TFTP Server

For my 3602i AP I used this Image (without renaming)

ap3g2-k9w7-tar.152-2.JB.tar

Now the next step is to set this AP for Site Survey.

Glad you got it converted.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

thefranmanatt
Level 1
Level 1

This process was a pita for me. 

Unless you can join it to a controller the archive download-sw command didn't work because the AP keep reDHCPing in the middle of the download.

If you can run the command while it is joined to a controller that is the best. 

If not you may need to do it the hard way

https://supportforums.cisco.com/docs/DOC-14636

Long read on my issues with this process.

https://supportforums.cisco.com/message/3829516#3829516

CCNP - Wireless
CWNA and CWAP

CCNP - Wireless
CWNE #136
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: