10-16-2008 09:50 AM - edited 07-03-2021 04:38 PM
Can someone point me to a document outlining this process (specifically for a 1200 series ap)
10-16-2008 10:43 AM
Here is a doc that explains how to upgrade from autonomous to LWAPP.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
10-22-2008 06:26 AM
Note that if you don't care about preserving the existing config information (such as IP addresses) on the AP, there's no particular reason you have to use the conversion tool; you can install the new code image just like a normal IOS upgrade. If I'm doing just one or two at a time and I have the AP in my hands, I usually don't bother with the tool, but if the APs are already in place or if there are a lot to convert, definitely use the tool.
10-24-2008 07:17 AM
For older APs (such as the 1100, 1200 or some 1131s) use the conversion tool as it generated the AP certificates that are not otherwise present on these APs.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: