cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
634
Views
5
Helpful
3
Replies
Highlighted
Beginner

Converting the Cisco AIR-AP1572EAC-E-K9 to autonomous mode

I have this AP and I am trying to convert to autonomous. To be able to use as a survey AP

I cannot get it to take the image from my tftp with the power button as I have done with other AP's.

The power button does not pause for me to release then the upload begins.

I think this is due to the LWAPP state of this AP wile I'm in cli I have no config t command available this also due to the LWAPP state.

cisco AIR-AP1572EAC-E-K9   (PowerPC) processor (revision E1) with 376814K/134656K bytes of memory.
Processor board ID FCZ2042Z01T
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 8.2.100.0
5 Gigabit Ethernet interfaces

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:D7:8F:E9:CA:E0
Part Number                          : 73-15697-05
PCB Serial Number                    : FOC20365AC2
Top Assembly Part Number             : 068-05342-02
Top Assembly Serial Number           : FCZ2042Z01T
Top Revision Number                  : A0
Product/Model Number                 : AIR-AP1572EAC-E-K9

These are the commands that I have

  access-enable    Create a temporary Access-List entry
  access-profile   Apply user-profile to interface
  access-template  Create a temporary Access-List entry
  capwap           capwap exec commands
  cd               Change current directory
  clear            Reset functions
  clock            Manage the system clock
  crypto           Encryption related commands.
  debug            Debugging functions (see also 'undebug')
  delete           Delete a file
  dir              List files on a filesystem
  disable          Turn off privileged commands
  do-exec          Mode-independent "do-exec" prefix support
  enable           Turn on privileged commands
  exit             Exit from the EXEC
  fsck             Fsck a filesystem
  help             Description of the interactive help system
  led              LED functions
  lock             Lock the terminal
  logging          Handles logging operations
  login            Log in as a particular user
  logout           Exit from the EXEC
  lwapp            lwapp exec commands
  mkdir            Create new directory
  monitor          Monitoring different system events
  more             Display the contents of a file
  name-connection  Name an existing network connection
  no               Disable debugging functions
  ping             Send echo messages
  pwd              Display current working directory
  release          Release a resource
  reload           Halt and perform a cold restart
  rename           Rename a file
  renew            Renew a resource
  rmdir            Remove existing directory
  routing-context  Routing Context
  rsh              Execute a remote command
  save             Start to save raise_interrupt_level stack
  send             Send a message to other tty lines
  set              Set system parameter (not config)
  show             Show running system information
  ssh              Open a secure shell client connection
  systat           Display information about terminal lines
  terminal         Set terminal line parameters
  test             Test subsystems, memory, and interfaces
  traceroute       Trace route to destination
  undebug          Disable debugging functions (see also 'debug')
  verify           Verify a file
  where            List active connections

When I show dir its shows the autonomous image that I need can this be loaded if so how.

    2  -rwx        4695   Mar 1 1993 00:03:41 +00:00  event.log
    3  -rwx        1048   Mar 1 1993 00:02:23 +00:00  private-multiple-fs
    4  -rwx         278   Jan 1 1970 00:03:23 +00:00  info
    5  drwx         448   Jan 1 1970 00:02:17 +00:00  c1570-rcvk9w8-mx
   13  -rwx           0   Mar 1 1993 00:00:34 +00:00  config.txt
   14  drwx         960   Jan 1 1970 00:06:11 +00:00  c1570-k9w7-mx.153-3.JC
  223  -rwx         185   Mar 1 1993 00:03:41 +00:00  env_vars

 

I do have the image I need but cannot get it loaded some help please

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Master

Boot up the AP and issue this command:

capwap ap autonomous

That should work for you.

-Scott 

*** Please rate helpful posts *** 

-Scott
*** Please rate helpful posts ***

View solution in original post

3 REPLIES 3
Highlighted
Hall of Fame Master

Boot up the AP and issue this command:

capwap ap autonomous

That should work for you.

-Scott 

*** Please rate helpful posts *** 

-Scott
*** Please rate helpful posts ***

View solution in original post

Highlighted

I cant thank you enough thought that I had tried that one but cant have.

thanks

Highlighted

have the same problem and how did u get the file c1570-k9w7-tar.153-3.JPK.tar because am not able to  download from my side and while commands did u use to upload the firmware upon downloading

Content for Community-Ad