08-26-2014 11:55 AM - edited 07-05-2021 01:26 AM
Hi Guys,
I've recently started to deploy RF profiles on various sites based on different data rate requirements. I know before the days of RF Profiles that Coverage Hole Detection (CHD) was enabled on the WLAN.
My query is, now that RF profiles exists, can you disable CHD on a specific WLAN and enable it on an RF profile or does it have to be enabled on both for it to function?
Cheers,
N
08-27-2014 11:27 AM
What version of code are you running?
09-02-2014 01:03 AM
7.6.130.0
I have a feeling it needs to be enabled globally on the WLAN and then it can be "tweaked" using the profile configuration.
09-02-2014 05:26 AM
I still need to play with 8.0, that is why I was asking because I am not sure on that version. What I gather from the documentation it is the same... http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_01011101.html
However, with 7.6 you will need to have it enabled on the WLAN as there is no way to 're-enable' it on the RF Profile. You could tweak it to not be kicked off often though
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide