02-06-2023 10:56 AM
We just synced our new 9800 WLC to Cisco Prime. However, when we go to configure APs using Prime we can't configure policy tags (AP groups). Is there a way to import those configurations from the 9800 to Prime? or how do we assign these to the APs using Prime?
Solved! Go to Solution.
02-06-2023 11:30 AM - edited 02-06-2023 11:34 AM
This feature is more for DNA center not Prime. Prime has limited capabilities when trying to "Configure" the 9800's vs AireOS. You can always configure the tags from the 9800 controllers.
On the 9800's you can create a regex filter to apply tags if you want. You can also look at the configuration on the cli and build a script to apply tags to mac address.
02-06-2023 11:30 AM - edited 02-06-2023 11:34 AM
This feature is more for DNA center not Prime. Prime has limited capabilities when trying to "Configure" the 9800's vs AireOS. You can always configure the tags from the 9800 controllers.
On the 9800's you can create a regex filter to apply tags if you want. You can also look at the configuration on the cli and build a script to apply tags to mac address.
02-08-2023 12:06 AM
Hi Anthony
There is limited option in Cisco Prime.You can create Tags in 9800 WLC. In Prime check below path if you find some thing
Configuration / Wireless Technologies / Cisco Catalyst 9800 Configuration
Good Luck
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide