09-25-2013 03:04 PM - edited 07-04-2021 12:56 AM
Does anyone knows when they will be supported by the controller (if at all...)?
Thanks,
Sent from Cisco Technical Support iPad App
09-25-2013 03:05 PM
Not that I know of as of yet. You can always use a 2504 for OEAP's for now.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
09-25-2013 03:08 PM
That means by one... I can't tell my bosses to buy another controller because the new one does not support the home ap's...
How about the virtual one?
Sent from Cisco Technical Support iPad App
09-25-2013 03:22 PM
The vWLC still requires licensing and it too doesn't support OEAP 600's.
Sent from Cisco Technical Support iPhone App
09-25-2013 03:23 PM
Setup Guidelines
The Cisco Aironet 600 Series OEAP is supported on these controllers: Cisco 5508, WiSM-2 and the Cisco 2504.
The first controller release that supports Cisco Aironet 600 Series OEAP is 7.0.116.0
The controller?s Management Interfaces need to be on a routable IP network.
Corporate Firewall configuration needs to be changed to allow traffic with UDP port numbers 5246 and 5247.
Sent from Cisco Technical Support iPhone App
09-25-2013 04:54 PM
with 3.2.xSE release 5760 WLC only suupprt following AP models
Cisco Aironet 1040, 1140, 1260, 1600, 2600, 3500, 3600
http://www.cisco.com/en/US/docs/wireless/controller/3.2_0_se/release_notes/OL28115_3_2_se_rn.pdf
For your OEAP deployment following document should help
1. OEAP600 config guide
http://www.cisco.com/en/US/products/ps11579/products_tech_note09186a0080b7f10e.shtml
2. Cisco Office Extend Deployment Guide
HTH
Rasika
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: