DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating

erictang03 · ‎11-26-2015

flashfs[3]: 182 files, 7 directories
flashfs[3]: 0 orphaned files, 0 orphaned directories
flashfs[3]: Total bytes: 31808000
flashfs[3]: Bytes used: 10418688
flashfs[3]: Bytes available: 21389312
flashfs[3]: flashfs fsck took 9 seconds.
flashfs[3]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 0 seconds.
flashfs[4]: Initialization complete....done Initializing flashfs.

Warning: the compile-time code checksum does not appear to be present.

Radio0 present 8764B 8000 0 A8000000 A8010000 0
Rate table has 180 entries (48 SGI/72 BF variants)

Radio1 present 8764B 8000 0 88000000 88010000 4
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Warning: the compile-time code checksum does not appear to be present.
cisco AIR-SAP1602I-C-K9    (PowerPC) processor (revision B0) with 98294K/32768K
bytes of memory.
Processor board ID FGL1751S216
PowerPC CPU at 533Mhz, revision number 0x2151
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radios

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: F0:7F:06:F0:87:EB
Part Number                          : 73-14671-04
PCA Assembly Number                  : 000-00000-00
PCA Revision Number                  :
PCB Serial Number                    : FOC1835322R
Top Assembly Part Number             : 800-38552-01
Top Assembly Serial Number           : FGL1751S216
Top Revision Number                  : A0
Product/Model Number                 : AIR-SAP1602I-C-K9

Press RETURN to get started!

*Mar 1 00:00:11.779: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-ta
ble No such file or directory
*Mar 1 00:00:11.867: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self t
est passed
*Mar 1 00:00:13.635: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
test passed on interface Dot11Radio 0
*Mar 1 00:00:14.747: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
test passed on interface Dot11Radio 1
*Mar 1 00:00:15.675: not a autoconfig enabled device!!!
*Mar 1 00:00:17.003: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state
to up
*Mar 1 00:00:18.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to down
*Mar 1 00:01:03.863: Starting Ethernet promiscuous mode
*Mar 1 00:01:03.935: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to a
dministratively down
*Mar 1 00:01:03.935: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to a
dministratively down
*Mar 1 00:01:03.943: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1600 Software (AP1G2-K9W7-M), Version 15.2(2)JB, RELEASE SO
FTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport                                                  ;
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 11-Dec-12 04:30 by prod_rel_team
*Mar 1 00:01:03.943: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a c
old start
*Mar 1 00:01:04.931: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to up
*Mar 1 00:01:04.935: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
*Mar 1 00:01:04.935: %LINEPROTO-5-UPDOWN: Line protocol on Inter
1, changed state to down
*Mar 1 00:01:15.903: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:01:16.903: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to down
ap>en
Password:
ap#ip http server
    ^
% Invalid input detected at '^' marker.

ap#
*Mar 1 00:03:09.090: %CDP_PD-4-POWER_OK: Full power - NON_CISCO-NO_CDP_RECEIVED
inline power source
ap#
*Mar 1 00:04:21.481: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to up
*Mar 1 00:04:23.481: %LINK-6-UPDOWN: Interface BVI1, changed state to up
*Mar 1 00:04:24.481: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to up
ap#
*Mar 1 00:06:55.779: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to down
*Mar 1 00:06:57.779: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:06:58.779: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to down
ap#conf t
Enter configuration commands, one per line. E
ap(config)#hostname
% Incomplete command.

ap(config)#hostname
% Incomplete command.

ap(config)#!
ap(config)#dot11 ssid
% Incomplete command.

ap(config)#hostname Umy_Prod
Umy_Prod(config)#enable secret MySecretPassword
Umy_Prod(config)#no username Cisco
Umy_Prod(config)#username some_admin secret ssh_secret_password
Umy_Prod(config)#line console 0
Umy_Prod(config-line)#logging synchronous
Umy_Prod(config-line)#exec-timeout 180 0
Umy_Prod(config-line)#exit
Umy_Prod(config)#ip domain-name my.utacgroup.com
Umy_Prod(config)#cryto key generate rsa
                    ^
% Invalid input detected at '^' marker.

Umy_Prod(config)#crypto key generate rsa
The name for the keys will be: Umy_Prod.my.utacgroup.com
Choose the size of the key modulus in the range of 360 to 4096 for your
General Purpose Keys. Choosing a key modulus greater than 512 may take
a few minutes.

How many bits in the modulus [512]: 2048
% Generating 2048 bit RSA keys, keys will be non-exportable...
[OK] (elapsed time was 7 seconds)

Umy_Prod(config)
*Mar 1 00:30:00.913: %SSH-5-ENABLED: SSH 1.99 has been enabled
Umy_Prod(config)#ip ssh version 2
Umy_Prod(config)#line vty 0 4
Umy_Prod(config-line)#transport input ssh
Umy_Prod(config-line)#exit
Umy_Prod(config)#dot11 ssid Umy_Prod
Umy_Prod(config-ssid)#authentication oen
                                      ^
% Invalid input detected at '^' marker.

Umy_Prod(config-ssid)#authentication open
Umy_Prod(config-ssid)#authentication key-management wpa version 2
Umy_Prod(config-ssid)#wpa-psk asci umyprd015
Umy_Prod(config-ssid)#guest mode
                            ^
% Invalid input detected at '^' marker.

Umy_Prod(config-ssid)#guest-mode
Umy_Prod(config-ssid)#exit
Umy_Prod(config)#interface dot11Radio 0
Umy_Prod(config-if)#encyption mode ciphers aes-ccm
                       ^
% Invalid input detected at '^' marker.

Umy_Prod(config-if)#encryption mode ciphers aes-ccm
Umy_Prod(config-if)#ssid Umy_Prod
Umy_Prod(config-if)#no shutdown
Umy_Prod(config-if)#
*Mar 1 00:38:13.584: %LINK-5-CHANGED: Interface Dot11Radio0
eset
Umy_Prod(config-if)#e
*Mar 1 00:38:14.604: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0, Scanning freque
ncies for 22 seconds
Umy_Prod(config-if)#exit
Umy_Prod(config)#exit
Umy_Prod#
*Mar 1 00:38:26.044: %SYS-5-CONFIG_I: Configured from console by console
Umy_Prod#copy
*Mar 1 00:38:38.748: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2432
selected
*Mar 1 00:38:38.768: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

*Mar 1 00:38:38.776: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state
wn
Umy_Prod#copy
*Mar 1 00:38:38.784: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
Umy_Prod#copy
*Mar 1 00:38:39.812: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

*Mar 1 00:38:40.812: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to up
Umy_Prod#copy running0
*Mar 1 00:38:45.888: %LINK-6-UPDOWN: Interface BVI1, changed state to up
*Mar 1 00:38:46.888: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to up
Umy_Prod#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Umy_Prod#
*Mar 1 00:40:31.487: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to up
Umy_Prod#
*Mar 1 00:41:21.998: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod#
*Mar 1 00:41:52.790: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Sending station has left the BSS
*Mar 1 00:41:53.326: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod#
*Mar 1 00:42:23.986: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Sending station has left the BSS
*Mar 1 00:42:24.662: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod#
*Mar 1 00:42:31.246: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Se
Umy_Prod#
*Mar 1 00:43:17.577: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod#
*Mar 1 00:43:48.709: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Sending station has left the BSS
*Mar 1 00:43:49.357: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod#
*Mar 1 00:44:20.057: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Sending station has left the BSS
Umy_Prod#
*Mar 1 00:47:57.178: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod#
*Mar 1 00:48:12.062: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Sending station has left the BSS
Umy_Prod#
*Mar 1 00:51:04.525: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod#
*Mar 1 00:51:35.676: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Sending station has left the BSS
*Mar 1 00:51:36.252: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod#
*Mar 1 00:52:06.928: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Sending station has left the BSS
*Mar 1 00:52:07.548: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Umy_Prod(config)#dot1
*Mar 1 00:52:38.272: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Sending station has left the BSS
*Mar 1 00:52:38.884: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod(config)#dot11 ssid Umy_Prod
Umy_Prod(config-ssid)#authentication key management
*Mar 1 00:53:09.615: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Sending station has left the BSS
Umy_Prod(config-ssid)#authentication key-management wpa version 2
Umy_Prod(config-ssid)#
*Mar 1 00:53:34.323: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to do
wn
Umy_Prod(config-ssid)#
*Mar 1 00:53:34.331: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Mar 1 00:53:35.323: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
Umy_Prod(config-ssid)#
*Mar 1 00:53:35.359: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

*Mar 1 00:53:36.359: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to up
Umy_Prod(config-ssid)#wpa-psk asci pa$$w0rd1
Umy_Prod(config-ssid)#
*Mar 1 00:53:59.559: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to do
wn
Umy_Prod(config-ssid)#
*Mar 1 00:53:59.567: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Mar 1 00:54:00.559: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
Umy_Prod(config-ssid)#gu
*Mar 1 00:54:00.595: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

*Mar 1 00:54:01.595: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to up
Umy_Prod(config-ssid)#guest-mode
Umy_Prod(config-ssid)#
*Mar 1 00:54:06.143: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to do
wn
Umy_Prod(config-ssid)#e
*Mar 1 00:54:06.151: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Mar 1 00:54:07.143: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
Umy_Prod(config-ssid)#exit
*Mar 1 00:54:07.179: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

*Mar 1 00:54:08.179: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to up
Umy_Prod(config-ssid)#exit
Umy_Prod(config)#exit
Umy_Prod#
*Mar 1 00:54:16.207: %SYS-5-CONFIG_I: Configured from
Umy_Prod#
*Mar 1 00:54:30.303: %DOT11-7-AUTH_FAILED: Station cca2.2345.87fe Authenticatio
n failed
Umy_Prod#
*Mar 1 00:55:04.094: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod#
*Mar 1 00:55:35.258: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Sending station has left the BSS
*Mar 1 00:55:35.818: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod#copy
*Mar 1 00:56:06.514: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Sending station has left the BSS
*Mar 1 00:56:07.162: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Umy_Prod#
*Mar 1 00:56:37.897: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Sending station has left the BSS
*Mar 1 00:56:38.569: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   cca2.2345
.87fe Associated KEY_MGMT[WPAv2 PSK]
Umy_Prod#
*Mar 1 00:57:09.249: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station cca2.2345.87fe Reason: Sending station has left the BSS

Sandeep Choudhary · ‎11-27-2015

paste the complete config of the AP.

Regards