I have an instance at a Fire Station on Spectrum Cable with 2 buildings, 1 OEAP602 in each building. Both 602's link and function as expected to a common WLC on 18.104.22.168 code. In the process of retiring all 602's with 1815t's supported on a different (temp) WLC on 22.214.171.124 code. It would seem that 8.5 code does NOT support more than 1 nat'd device per IP. thus which ever AP links first can open a DTLS tunnel. I have oeap1810's also and I can link a pair on 1 IP in 8.3 but not 8.5. I can target each AP to a different WLC on 1 IP, say 1810 to 8.3 and 1815t to 8.5 giving me a one for one at the WLC. Unfortunately when all done, there will only be 1 nat'd controller, not 2.
I don’t know if I understand your question, but I have used two 3702 in OEAP behind the same nat IP address with no issues to a 3504 running 126.96.36.199. I do have also two 1815T behind the same nat ip address connected to a 3504 running 8.10
Hello Community, I have an issue where APs do not connect to the WLC. Connection is made over VPN. Until yesterday all 3 APfailed with below errors. We change the LAN connection to a cisco router and now one of the AP magically connected to the...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
Cisco Champion Radio · S8|E6: Fastlane+ Optimizes Network and Device Communication
Cisco Fastlane+ is a co-developed solution with Apple that significantly improves the experience of any Wi-Fi 6 capable iPhone or iPad connected to a Cisco Catalyst 9130 A...
We are pleased to announce the immediate availability of the IOS-XE release 17.4.1 for the Catalyst Wireless Controllers. The new code is now posted on the CCO and can be found at this link:
Table of Contents
The purpose of this document is to provide step-by-step instructions regarding how to connect your read-only Catalyst 9800 WLC or AireOS WLC with Cisco DNA Center for Assurance monitoring through manual configuration. I...